Small Desk Atomic Clock, Auto Set Digital Desk Clocks with Temperature, Humidity and Date, Alarm Clock for Bedroom, Office, 4 Time Zone, Auto DST.

Price: $19.99
(as of Jan 10, 2025 17:23:21 UTC – Details)

Product Description

My clock doesn’t synchronize at all

Most WWVB radio controlled clocks work great, as evidenced by the hundreds of thousands of units that have been sold throughout the United States. However, if your radio clock or receiver isn’t working, we suggest:

If your clock uses batteries, check them and replace if necessary.If you have a desk top unit, try rotating it 90 degrees. If you have a wall clock try mounting it on a wall perpendicular to the one it is currently on (e.g. if it is on a north-south wall try an east-west wall). The antennas are directional and you might be able to improve the signal strength by turning the antenna.Place the clock along a wall or near a window that faces Fort Collins, Colorado.Locate the clock at least 1 or 2 meters away from any computer monitors, which can cause interference (some monitors have a scan frequency at or near the WWVB carrier frequency of 60 kHz).If nothing else works, take the clock outdoors at night and power it down (remove the batteries), then power it up again to force it to look for the WWVB signal. If it works outdoors but not indoors, you probably have a local interference problem inside your house or building. If it doesn’t work outdoors at night, it’s probably best to return it,The shielding provided by a metal building might prevent the clock from working. For example, if you live in a mobile home or a house with steel siding, the clock might not work.If you think your clock is defective, please ask us.

My clock is off by one or more hours

Remember, minutes and seconds are the same in all time zones within the WWVB coverage area; only hours are different. If your clock is off by one or more hours, it probably has to do with a time zone setting. Make sure you have properly selected your time zone using the instructions that came with your radio controlled clock.

If you live in an area that does not observe Daylight Saving Time (Arizona or Hawaii), make sure that DST is disabled on your radio controlled clock. You might have to select another time zone to make your clock display the correct time when DST is in effect.

Some radio controlled clocks only allow you to select four different time zones (Pacific, Mountain, Central, and Eastern). When purchasing a clock, make sure that it can handle your time zone. For example, we’ve heard from a few users who purchased clocks in Hawaii but can’t select the Hawaiian Time Zone.

My clock is off by a few minutes or seconds

This can be due to a number of different problems as listed below:

Reception Problem – If your clock isn’t currently receiving the signal, the time will “drift” and gradually get further and further from the correct time. Remember, if the signal isn’t being received, your clock isn’t radio controlled any longer, it’s just a regular diigital clock. Most digital clocks can keep time to 1 second per day or better, but some will be off by several seconds per day.

Digital radio controlled clocks have an indicator on the display that tells you if the signal is being received properly. If you are not sure if the signal is being received, try powering down the clock (Remove the batteries or Turn off the machine), then turn it on again to see if it can synchronize. If it doesn’t, see the tips above for improving your reception.

Checking your clock – There is no need to check a properly working WWVB clock, it should always display the correct time. However, you might want to check it if you suspect you have a problem. You can check your clock by using the NIST web clock, or by listening to NIST Radio Station WWV using a shortwave radio or telephone.

We switched to Daylight Saving Time, and my clock didn’t change

This is probably due to a reception problem. Your clock hasn’t received the signal recently, so it didn’t know about the time change. Digital radio controlled clocks have an indicator on the display that tells you if the signal is being received properly. If you are not sure if the signal is being received, try powering down the clock (Turn off the machine or remove the batteries), then turn it on again to see if it can synchronize. If it doesn’t, see the tips above for improving your reception.

Also, clocks have a way to disable Daylight Saving Time. Make sure it isn’t disabled if your area observes DST.

My clock switched to Daylight Saving Time, but we don’t observe DST where I live

There is an on/off toggle for DST. Turn it off if your area does not observe DST.

Sensitive Touchscreen Buttons

LCD clock, 4.9″ high-definition ultra-thin display, can display calendar, switchable time (12/24H), switchable indoor temperature (°C/°F), indoor real-time humidity,

Desk Clock or Wall Clock

It can be easily hung on a wall or placed on a tabletop using the sturdy fold-out stand. HD display and digits of the clock make this beautiful clock ideal for home, office, school, hospital, etc.

Atomic Self-Setting

Digital Atomic Clock automatically synchronizes itself with the WWVB radio broadcast by the US every day. Digital Wall Clock automatically updates month, day and date. The daily update time is 1:00am, 2:00am, 3:00am, 4:00am, 5:00am. 4 time zones can choose PST, MST, CST, EST, and can choose to turn on or off daylight saving time.

【ATOMIC DIGITAL CLOCK AUTO SET】: The atomic desk clock automatically receives Colorado radio time signals, syncs with WWVB radio broadcasts, and updates with accurate time and date. Atomic clock will always be accurate to within one second as it receives daily WWVB updates. 4 time zones to choose between PST, MST, CST, EST.
【ALARM CLOCK WITH SNOOZE】: Atomic alarm clock to meet daily wake-up needs, snooze function. Alarm status also shows on the display for easy check. In snooze mode, press any key except SNZ/LG to exit.
【ATOMIC DESK CLOCK WITH BACKLIGHT】: Powered by 3 AAA batteries (included) . Press the SNZ/LG key to light up the backlight for 10 seconds.
【SETTING TIME ZONE】:After the waveform icon flashes, it means that the RCC clock has ended the wave receiving mode. At this time, press the “UP” key to select the time zone. The modern design of the full screen clock makes it the perfect gift for your loved ones.
Notice: When the product is in radio mode, do not block the signal transmitter and receiver holes. Otherwise, it will affect the product’s reception of radio wave signals.